Shop / FEYNLAB / Plastic Black Ultra
FEYNLAB · Protection
Plastic Black Ultra
- Free click & collect from Nunawading
- Shipped Australia-wide
- Questions? Call 0475 000 066 or email info@shoyi.com.au
Plastic Black Ultra is a ceramic-based restorer for badly faded black exterior trim. It works through repolymerisation, bonding with UV-damaged polymer chains to rebuild the plastic surface, then locks in a ceramic backbone for lasting protection. Ideal for bringing faded black trim and bumpers back to a deep, rich black.
Key features
- Restores heavily faded black trim to a deep, rich black in one or two swipes
- Repolymerisation repairs polymer chains broken down by UV and the elements
- Ceramic backbone gives a durable, weather-resistant finish
- Thicker formula than its predecessor, also suited to heavy machinery and industrial use
- Extra coats can be built up on extremely faded trim
Specifications
| Application temperature |
10°C to 30°C |
| Durability |
1 year |
| Layers |
1 component layer |
| Shelf life |
Unopened: 1 year. Opened: use within 3 to 4 months |
| Time between coats |
At least 12 hours (overnight) |
Approved surfaces
- Black textured plastics
- Black plastic bumpers
In the box
Preparation
- Thoroughly wash the vehicle with Pure Wash to remove all topical contamination.
- Place the vehicle in a well-lit, temperature-controlled (10°C to 30°C), contamination-free environment.
- Make sure the application area is free of loose contamination.
Directions
- Shake the bottle vigorously for 1 minute before use.
- Apply a small amount to the microfibre applicator and work it into the surface, using enough to coat the area evenly without oversaturating.
- Let the product dwell and soak in for 5 to 10 minutes, or keep applying as needed within a 5 to 10 minute window.
- After 5 minutes, return to the starting point, even out the surface and remove excess product.
- For extremely faded trim, apply further coats, allowing at least 12 hours (overnight) of curing between coats.
- Product usage varies with the type of plastic and its condition; more oxidised trim may need more product or multiple applications.
- During the final wipe, inspect every panel for leftover residue (high spots), especially around edges, emblems and tight areas.
- Remove high spots within 20 to 40 minutes of the final wipe, as they are much harder to remove once curing has started.
- Higher humidity speeds up curing. If humidity approaches 80% or higher, consider shortening dwell and wipe times, and apply with humidity as low as possible.
Aftercare
- Highly recommended: cure the surface in the sun for as long as possible straight after application.
- Avoid any water exposure for 4 hours. If water gets on the surface, gently wipe it off.
- Avoid all chemicals, including car washes, for 7 days.
Cautions
- Always wear a respirator and gloves during application.
- Do not use on grey trim. The pigment will permanently stain trim that is not black.
- Do not apply to unapproved surfaces.
- Always keep the cap on the bottle when not in use.
From the studio
Shoyi is an authorised FEYNLAB trainer and installer and an official FEYNLAB distributor, so this is the range we use on customer cars in the Nunawading studio, not something we have only read about.
Not sure it suits your car? Call 0475 000 066 or email info@shoyi.com.au and we will point you the right way. Related reading: How to wash a PPF-protected car, Why Melbourne summer is hard on paint.