Shop FEYNLAB Leveling Aid

FEYNLAB · Protection

Leveling Aid

$85.00incl. GST

Size
  • Free click & collect from Nunawading
  • Shipped Australia-wide
  • Questions? Call 0475 000 066 or email info@shoyi.com.au

Leveling Aid is a spray used in the final wipe-off, or levelling, stage of more involved ceramic coating installs such as Ceramic Plus and Heal Lite. It helps the coating bond, supports proper film build and leaves the surface buffed clear. It also works when removing coatings from other brands, making it a useful finishing step for installers.

Key features

  • Makes the final levelling and wipe-off of complex coatings easier
  • Reinforces bonding and promotes film build as the last step of the install
  • Leaves the coated surface buffed to a clear appearance
  • Designed for Ceramic Plus and Heal Lite, and also works with non-FEYNLAB coatings
  • Apply by microfibre towel or microfibre applicator pad

Specifications

Application temperature 10°C to 30°C, with humidity as low as possible
Compatible with Ceramic Plus, Heal Lite and coatings not made by FEYNLAB
Coverage Maximum of half a door or a quarter of a bonnet per application

In the box

  • 120 ml bottle of Leveling Aid

Preparation

  1. Wash the vehicle thoroughly with Pure Wash.
  2. Follow with a topical decontamination clay treatment using Prime.
  3. If necessary, use a ferrous iron removal product to remove all embedded iron deposits.
  4. Polish the paint to the desired level.
  5. Remove all polish oils with Panel Prep to ensure optimal bonding and durability of the coating.

Directions

  1. Use Leveling Aid once the coating has been applied and has cured about 75%.
  2. Apply 3 to 5 sprays to a clean microfibre towel.
  3. For each section the size of half a door or a quarter of a bonnet, add 3 to 4 more sprays to the towel and spread evenly over the surface.
  4. Use enough product to coat the area evenly without over-saturating. A microfibre applicator pad can be used instead of a towel.
  5. Flip the towel and buff the area clear, or buff with a separate clean microfibre towel, wiping off in the same pattern as the application.
  6. Carefully inspect each finished panel for leftover coating residue (high spots), especially edges, emblems and tight spaces, before moving on.
  7. High spots are much easier to remove within 20 to 40 minutes of the final wipe.

Aftercare

  1. Avoid any incidental water exposure for 24 hours.
  2. Avoid all chemicals, including car washes, for 7 days.
  3. Wash and maintain with Pure Wash or Pure Rinseless and Detailer.
  4. Higher humidity speeds up curing. If humidity approaches 75% or higher, consider shortening the recommended dwell and wipe times.

Cautions

  • Always wear a respirator and gloves during application.
  • Make sure the application area is free of loose contamination.
  • Always keep the cap on the bottle when not in use.
  • Do not exceed half a door or a quarter of a bonnet per application.

From the studio

Shoyi is an authorised FEYNLAB trainer and installer and an official FEYNLAB distributor, so this is the range we use on customer cars in the Nunawading studio, not something we have only read about.

Not sure it suits your car? Call 0475 000 066 or email info@shoyi.com.au and we will point you the right way. Related reading: Why paint prep decides the finish, Paint correction before PPF or ceramic.

Authorised & Certified Installer
SunTek authorised installerFEYNLAB certified installerAutoArmorModBox Works
Sister company ofAuto Marquee Group
Site created byModBox Works