Shop / FEYNLAB / Tire & Wheel Cleaner
FEYNLAB · Maintenance
Tire & Wheel Cleaner
- Free click & collect from Nunawading
- Shipped Australia-wide
- Questions? Call 0475 000 066 or email info@shoyi.com.au
Tire & Wheel Cleaner is an alkaline cleaner that strips browning, road grime, grease, brake dust and old silicone dressing from tyres. Its surfactants work into the pores of the rubber to pull out embedded contamination, leaving a clean factory finish. It is the prep step before Tire Coating and is safe on clear-coated rims.
Key features
- Removes stubborn browning, road grime, grease, oil and brake dust
- Draws old tyre dressing build-up out of the rubber's pores
- Preps tyres properly for Tire Coating or your preferred dressing
- Safe on clear-coated rims, including rims coated with Wheel and Caliper
- Body shop safe and 100% silicone free
Specifications
| Silicone |
100% silicone free |
| pH |
High alkaline |
Approved surfaces
- Rubber tyres
- Clear-coated rims
- Clear-coated rims treated with Wheel and Caliper
In the box
- 500ml bottle with sprayer
Preparation
- Place the vehicle in a well-lit, temperature-controlled environment between 10°C and 30°C.
Directions
- Spray evenly onto the tyre, working from the bottom to the top.
- Allow at least 10 seconds of dwell time.
- Agitate with a stiff bristle brush until all visible debris is removed.
- Rinse thoroughly with free-flowing water.
- In water-restricted areas, apply with a microfibre towel instead, rotating to a clean side often for the best cleaning.
- For very dirty tyres, repeat the process.
- After cleaning, wipe all cleaned tyre surfaces with a water-saturated towel to remove product residue from the rubber.
- To clean wheels and tyres together, spray both evenly from bottom to top. Clean the wheel first with a soft bristle brush, then the tyre with a stiff bristle brush, and rinse both thoroughly with free-flowing water.
Aftercare
- Follow up with Tire Coating and Wheel and Caliper for long-term protection and shine.
Cautions
- Wearing a respirator and gloves during application is recommended.
- Do not apply to unapproved surfaces.
- Not for use on magnesium rims.
- Not a replacement for wheel acid or other products that dissolve brake dust from rims.
- Not for use as a maintenance product on tyres already treated with Tire Coating.
From the studio
Shoyi is an authorised FEYNLAB trainer and installer and an official FEYNLAB distributor, so this is the range we use on customer cars in the Nunawading studio, not something we have only read about.
Not sure it suits your car? Call 0475 000 066 or email info@shoyi.com.au and we will point you the right way. Related reading: How to wash a PPF-protected car, What to expect in the first weeks after PPF.